SURFACE MAINTENANCE MECHANIC (Title 32)
Indefinite Appointment/Temporary promotion not to exceed two (2) years. The purpose of the indefinite appointment/temporary promotion is to backfill a deployed Soldier. The indefinite appointment/temporary promotion will be terminated within 30 days of return of the incumbent to the position. NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Army National Guard. JOB
Summary:
The purpose of this position is to perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment. The major duties include, but are not limited to:
Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. PHYSICAL EFFORT:
Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights. WORKING CONDITIONS:
Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods. GENERAL
Experience:
Experience which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED
Experience:
Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 6, 12 or 18 months of specialized experience in the following:
WG-05 REQUIRES 6 MONTHS:
Experience using common hand tools in making repetitive repairs under close supervision. Experience which demonstrates the ability to perform the simpler and routine duties of the trade. WG-08 REQUIRES 12 MONTHS:
Experience using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics. WG-10 REQUIRES 18 MONTHS:
Experience diagnosing, repairing, overhauling, and modifying more complex vehicles, equipment, and more complicated systems. Experience which has provided a thorough knowledge of diagnostic equipment. Experience applying independent judgment in determining methods and techniques required to solve unusually complex maintenance and repair problems. Experience in testing, inspecting, and evaluating the work performed on vehicles, equipment and systems. KNOWLEDGE, SKILLS AND ABILITIES:
Knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer computerized diagnostic equipment and embedded diagnostics. Ability to utilize, interpret and apply parts list, manufacturer's repair manuals, technical manuals, diagrams, engineering drawings, diagnostic computer information, and schematics. COMPATIBLE MILITARY ASSIGNMENT:
For an indefinite appointment which is to backfill a deployed technician, MOS and unit of assignment are waived for 18 months following assignment. However, rank requirement must be met to avoid grade inversion. For temporary promotions, the MOS and unit remains with the permanent position from which temporarily promoted. MILITARY GRADE (Prior to Application):
Enlisted:
E-3 through E-7 COMPATIBLE MILITARY ASSIGNMENT:
ECMF:
12, 13, 14, 19, 25, 88, 91, 92 ,94 UNIT OF ASSIGNMENT:
Any unit within the state SPECIAL REQUIREMENTS:
This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. CAREER LADDER:
Predicated upon qualifications, individual could be hired at the WG-10 grade. An individual selected for this position at the lower grade will progressively be advanced to WG-10 upon achievement of required qualifications without further competition.
Estimated Salary: $20 to $28 per hour based on qualifications.
Summary:
The purpose of this position is to perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment. The major duties include, but are not limited to:
Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. PHYSICAL EFFORT:
Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights. WORKING CONDITIONS:
Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods. GENERAL
Experience:
Experience which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED
Experience:
Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 6, 12 or 18 months of specialized experience in the following:
WG-05 REQUIRES 6 MONTHS:
Experience using common hand tools in making repetitive repairs under close supervision. Experience which demonstrates the ability to perform the simpler and routine duties of the trade. WG-08 REQUIRES 12 MONTHS:
Experience using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics. WG-10 REQUIRES 18 MONTHS:
Experience diagnosing, repairing, overhauling, and modifying more complex vehicles, equipment, and more complicated systems. Experience which has provided a thorough knowledge of diagnostic equipment. Experience applying independent judgment in determining methods and techniques required to solve unusually complex maintenance and repair problems. Experience in testing, inspecting, and evaluating the work performed on vehicles, equipment and systems. KNOWLEDGE, SKILLS AND ABILITIES:
Knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer computerized diagnostic equipment and embedded diagnostics. Ability to utilize, interpret and apply parts list, manufacturer's repair manuals, technical manuals, diagrams, engineering drawings, diagnostic computer information, and schematics. COMPATIBLE MILITARY ASSIGNMENT:
For an indefinite appointment which is to backfill a deployed technician, MOS and unit of assignment are waived for 18 months following assignment. However, rank requirement must be met to avoid grade inversion. For temporary promotions, the MOS and unit remains with the permanent position from which temporarily promoted. MILITARY GRADE (Prior to Application):
Enlisted:
E-3 through E-7 COMPATIBLE MILITARY ASSIGNMENT:
ECMF:
12, 13, 14, 19, 25, 88, 91, 92 ,94 UNIT OF ASSIGNMENT:
Any unit within the state SPECIAL REQUIREMENTS:
This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. CAREER LADDER:
Predicated upon qualifications, individual could be hired at the WG-10 grade. An individual selected for this position at the lower grade will progressively be advanced to WG-10 upon achievement of required qualifications without further competition.
- Department:
5801 Miscellaneous Transportation/Mobile Equipment Maintenance - Salary Range:
$20.08 to $29.11 per hour
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
